Testname: Bi-directional writing mode for charts

Document Owner:

Thomas Klarhoefer

Last document change:

21.11.2008

Status of document:

Standard

Valid for version: OpenOffice.org_3.0

Test purpose:

Check the rtl function for chart

Known issues:

Preconditions of test:

OOO 3.1 with activated rtl Mode

Test documents:

chartrtl_corrected.ods
chartrtl_corrected.ods

Testcases:

Bi-directional writing mode for chart Title Status: Standard -
  1. Start OOo Version 3.1 or higher
  2. Tools / Options... / Language Settings / Tabpage Languages
  3. Mark Checkbox  Enabled for complex text layout (CTL)
  4. File / Open...
  5. Enter the name of the attached Testdocument (chartrtl_corrected.ods) in the File name textfield
  6. Press open
  7. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for Title and Subtitle
  8. Check, if Object Chart 3: Right to left show the correct (right to left)  writing direction for Title and Subtitle
  9. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  10. Select the Title
  11. Kontextmenu / Object properties.../ Tabpage Alignment
  12. Check, if the settings for Text direction are Use superordinate object settings
  13. Change the Text direction for the Title to Right to left
  14. Leave the Dialog by using ok
  15. Check, if the Text direction for the Title switched to right to left direction
  16. File / Save as... {name of your choice}
  17. File / reload
  18. Check, if the Text direction for the Title are right to left
  19. Change the Text direction for the Title to Use superordinate object settings
  20. Format / Page... / Tabpage Page
  21. Change the Text direction to Right to left (horizontal)
  22. Leave the Dialog by using ok
  23. Check, if the Text direction for the Title switched to right to left direction
  24. Check, if the Text direction for the Subtitle switched to right to left direction
  25. File / Save
  26. File / reload
  27. Check, if the Text direction for the Title are right to left
  28. Check, if the Text direction for the Subtitle are right to left
  29. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  30. Select the Subtitle
  31. Kontextmenu / Object properties.../ Tabpage Alignment
  32. Check, if the settings for Text direction are Use superordinate object settings
  33. Change the Text direction for the Subtitle to Left to right
  34. Leave the Dialog by using ok
  35. Check, if the Text direction for the Subtitle switched to Left to right direction
  36. Edit / Undo
  37. Check, if the Text direction for the Subtitle switched to Right to left direction
  38. Edit / Redo
  39. Check, if the Text direction for the Subtitle switched to Left to right direction
  40. File / Save
  41. File / reload
  42. Check, if the Text direction for the Subtitle are Left to right
Bi-directional writing mode for Chart Legend Status: Standard -
  1. Start OOo Version 3.1 or higher
  2. Tools / Options... / Language Settings / Tabpage Languages
  3. Mark Checkbox  Enabled for complex text layout (CTL)
  4. File / Open...
  5. Enter the name of the attached Testdocument (chartrtl_corrected.ods) in the File name textfield
  6. Press open
  7. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the Legend
  8. Check, if Object Chart 3: Right to left show the correct (right to left)  writing direction for the Legend
  9. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  10. Select the Legend
  11. Kontextmenu / Object properties.../ Tabpage Position
  12. Check, if the settings for Text direction are Use superordinate object settings
  13. Change the Text direction for the Title to Right to left
  14. Leave the Dialog by using ok
  15. Check, if the Text direction for the Legend switched to right to left direction
  16. File / Save as... {name of your choice}
  17. File / reload
  18. Check, if the Text direction for the Legend are right to left
  19. Change the Text direction for the Legend to Use superordinate object settings
  20. Format / Page... / Tabpage Page
  21. Change the Text direction to Right to left (horizontal)
  22. Leave the Dialog by using ok
  23. Check, if the Text direction for the Legend switched to right to left direction
  24. File / Save
  25. File / reload
  26. Check, if the Text direction for the Legend are right to left
  27. Close the document
Bi-directional writing mode for axis Status: Standard -
  1. Start OOo Version 3.1 or higher
  2. Tools / Options... / Language Settings / Tabpage Languages
  3. Mark Checkbox  Enabled for complex text layout (CTL)
  4. File / Open...
  5. Enter the name of the attached Testdocument (chartrtl_corrected.ods) in the File name textfield
  6. Press open
  7. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the X Axis Title
  8. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the Y Axis Title
  9. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the Secondary X Axis Title
  10. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the Secondary Y Axis Title
  11. Check, if Object Chart 3: Right to left show the correct (right to left)  writing direction for the X Axis Title
  12. Check, if Object Chart 3: Right to left show the correct (right to left)  writing direction for the Y Axis Title
  13. Check, if Object Chart 3: Left to right show the correct (left to right) writing direction for the Secondary X Axis Title
  14. Check, if Object Chart 3: Left to right show the correct (left to right) writing direction for the Secondary Y Axis Title
  15. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  16. Select the X Axis
  17. Kontextmenu / Object properties.../ Tabpage Alignment
  18. Check, if the settings for Text direction are Use superordinate object settings
  19. Change the Text direction for the X Axis Title to Right to left
  20. Leave the Dialog by using ok
  21. Check, if the Text direction for the Axis Title switched to right to left direction
  22. Select the Y Axis
  23. Kontextmenu / Object properties.../ Tabpage Alignment
  24. Check, if the settings for Text direction are Use superordinate object settings
  25. Change the Text direction for the Y Axis Title to Right to left
  26. Leave the Dialog by using ok
  27. Check, if the Text direction for the Axis Title switched to right to left direction
  28. Select the Secondary X Axis
  29. Kontextmenu / Object properties.../ Tabpage Alignment
  30. Check, if the settings for Text direction are Use superordinate object settings
  31. Change the Text direction for the Secondary X Axis Title to Right to left
  32. Leave the Dialog by using ok
  33. Check, if the Text direction for the Axis Title switched to right to left direction
  34. Select the Secondary Y Axis
  35. Kontextmenu / Object properties.../ Tabpage Alignment
  36. Check, if the settings for Text direction are Use superordinate object settings
  37. Change the Text direction for the Secondary Y Axis Title to Right to left
  38. Leave the Dialog by using ok
  39. Check, if the Text direction for the Axis Title switched to right to left direction
  40. File / Save as... {name of your choice} 
  41. File / reload
  42. Check, if the Text direction for all Axis Title are right to left
  43. Change the Text direction for the X Axis to Use superordinate object settings
  44. Change the Text direction for the Secondary Y Axis to Use superordinate object settings
  45. Format / Page... / Tabpage Page
  46. Change the Text direction to Right to left (horizontal)
  47. Leave the Dialog by using ok
  48. Check, if the Text direction for the X Axis switched to right to left direction
  49. Check, if the Text direction for the Secondary Y Axis switched to right to left direction
  50. File / Save
  51. File / reload
  52. Check, if the Text direction for the X Axis are right to left
  53. Check, if the Text direction for the Secondary Y Axis are right to left
Bi-directional writing mode for Data Labels Status: Standard -
  1. Start OOo Version 3.1 or higher
  2. Tools / Options... / Language Settings / Tabpage Languages
  3. Mark Checkbox  Enabled for complex text layout (CTL)
  4. File / Open...
  5. Enter the name of the attached Testdocument (chartrtl_corrected.ods) in the File name textfield
  6. Press open
  7. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the Data Labels
  8. Check, if Object Chart 3: Right to left show the correct (right to left)  writing direction for the Data Labels
  9. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  10. Select the Data Labels
  11. Kontextmenu / Object properties.../ Tabpage Data Labels
  12. Check, if the settings for Text direction are Use superordinate object settings
  13. Change the Text direction for the Data Labels to Right to left
  14. Leave the Dialog by using ok
  15. Check, if the Text direction for the Data Labels switched to right to left direction
  16. File / Save as... {name of your choice}
  17. File / reload
  18. Check, if the Text direction for the Data Labels are right to left
  19. Change the Text direction for the Data Labels to Use superordinate object settings
  20. Format / Page... / Tabpage Page
  21. Change the Text direction to Right to left (horizontal)
  22. Leave the Dialog by using ok
  23. Check, if the Text direction for the Data Labels switched to right to left direction
  24. File / Save
  25. File / reload
  26. Check, if the Text direction for the Data Labels are right to left
  27. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  28. Select  a single Data Label
  29. Kontextmenu / Object properties.../ Tabpage Data Labels
  30. Check, if the settings for Text direction are Use superordinate object settings
  31. Change the Text direction for the Subtitle to Left to right
  32. Leave the Dialog by using ok
  33. Check, if the Text direction for the single Data Label switched to Left to right direction
  34. Check, if the Text direction for the other  Data Labels are still written in Right to left direction
  35. File / Save
  36. File / reload
  37. Check, if the Text direction for the single Data Label are Left to right
  38. Check, if the Text direction for the other Data Labels are Right to left
Bi-directional writing mode for equation Status: Standard -
  1. Start OOo Version 3.1 or higher
  2. Tools / Options... / Language Settings / Tabpage Languages
  3. Mark Checkbox  Enabled for complex text layout (CTL)
  4. File / Open...
  5. Enter the name of the attached Testdocument (chartrtl_corrected.ods) in the File name textfield
  6. Press open
  7. Check, if Object Chart 2: Left to right show the correct (left to right) writing direction for the equation
  8. Check, if Object Chart 3: Right to left show the correct (left to right also), (only western characters will not change the writing direction)  writing direction for the equation
  9. Switch into the Chart inplace mode chart Object Chart 1: Use superordinate settings (Double click the chart object)
  10. Select the equation
  11. Kontextmenu / Object properties.../ Tabpage Alignment
  12. Check, if the settings for Text direction are Use superordinate object settings
  13. Change the Text direction for the Title to Right to left
  14. Leave the Dialog by using ok
  15. Check, if the Text direction for the equation are still left to right direction (only western characters will not change the writing direction)
  16. File / Save as... {name of your choice}
  17. File / reload
  18. Check, if the Text direction for the equation are still left to right direction
  19. Change the Text direction for the equation to Use superordinate object settings
  20. Format / Page... / Tabpage Page
  21. Change the Text direction to Right to left (horizontal)
  22. Leave the Dialog by using ok
  23. Check, if the Text direction for the equation are still left to right direction (only western characters will not change the writing direction)
  24. File / Save
  25. File / reload
  26. Check, if the Text direction for the equation are still left to right direction

References:

http://specs.openoffice.org/chart/ChartBidirectionalWriting.odt

Acronyms:

-

testcase specification history

Bi-directional writing mode for charts

Date Change User
21.11.2008 (10:58:33) status updated Thomas Klarhoefer
21.11.2008 (10:26:40) status updated Thomas Klarhoefer
21.11.2008 (10:26:27) testcase details updated Thomas Klarhoefer
21.11.2008 (09:45:46) status updated Thomas Klarhoefer
21.11.2008 (09:24:46) status updated Thomas Klarhoefer
21.11.2008 (09:24:37) testcase details updated Thomas Klarhoefer
21.11.2008 (08:45:24) testcase details updated Thomas Klarhoefer
19.11.2008 (15:54:00) testcase details updated Thomas Klarhoefer
19.11.2008 (14:41:28) testcase details updated Thomas Klarhoefer
19.11.2008 (14:37:51) testcase details updated Thomas Klarhoefer
19.11.2008 (10:33:22) testcase details added Thomas Klarhoefer
19.11.2008 (10:15:03) testcase added Thomas Klarhoefer
19.11.2008 (10:14:07) testcase details updated Thomas Klarhoefer
19.11.2008 (10:13:11) testcase :Bi-directional writing mode for Data Labels updated Thomas Klarhoefer
19.11.2008 (10:12:26) testcase details updated Thomas Klarhoefer
19.11.2008 (09:43:20) testcase details updated Thomas Klarhoefer
18.11.2008 (18:34:20) testcase details updated Thomas Klarhoefer
18.11.2008 (17:31:28) testcase details added Thomas Klarhoefer
18.11.2008 (16:54:42) testcase added Thomas Klarhoefer
18.11.2008 (16:53:21) testcase details updated Thomas Klarhoefer
18.11.2008 (12:35:53) testcase details updated Thomas Klarhoefer
18.11.2008 (12:33:35) testcase details updated Thomas Klarhoefer
18.11.2008 (11:32:09) testcase details updated Thomas Klarhoefer
18.11.2008 (10:32:36) testcase details updated Thomas Klarhoefer
18.11.2008 (10:31:52) testcase details updated Thomas Klarhoefer
18.11.2008 (08:29:25) testcase details updated Thomas Klarhoefer
18.11.2008 (08:28:14) testcase details updated Thomas Klarhoefer
18.11.2008 (06:59:58) testcase details added Thomas Klarhoefer
18.11.2008 (06:59:36) testcase added Thomas Klarhoefer
18.11.2008 (06:58:17) testcase details updated Thomas Klarhoefer
17.11.2008 (16:01:21) testcase details updated Thomas Klarhoefer
17.11.2008 (15:46:00) testcase details updated Thomas Klarhoefer
17.11.2008 (15:02:23) testcase :Bi-directional writing mode for Chart Legend updated Thomas Klarhoefer
17.11.2008 (15:01:32) testcase details added Thomas Klarhoefer
17.11.2008 (15:01:04) testcase added Thomas Klarhoefer
17.11.2008 (14:59:59) testcase details updated Thomas Klarhoefer
17.11.2008 (14:50:13) testcase details updated Thomas Klarhoefer
17.11.2008 (14:21:26) testcase details updated Thomas Klarhoefer
17.11.2008 (13:48:19) testcase details updated Thomas Klarhoefer
17.11.2008 (13:35:59) testcase details updated Thomas Klarhoefer
17.11.2008 (12:10:19) testcase details updated Thomas Klarhoefer
17.11.2008 (11:29:46) testcase :Bi-directional writing mode for chart Title updated Thomas Klarhoefer
17.11.2008 (10:55:26) testcase details updated Thomas Klarhoefer
11.11.2008 Testcase specification created Thomas Klarhoefer